Call Today! (832) 271-7448

Emcee Logo

Emcee Model 1150 Staticon® System

EMCEE Model 1150 Staticon® System

IN-LINE MONITORING AND CONTROLLING OF ELECTRICAL CONDUCTIVITY OF FUELS

ASTM Standard Test Method D 2624

To reduce the hazards of electrical charge build up that can occur especially during high pumping rates of low conductivity materials through filters, additives are added to the product. Emcee Electronics, Inc. offers the Model 1150 Staticon®System (listed in ASTM D2624) that has the capability to monitor and control conductivity of such products in a moving stream. The
System can control the additive injection rate to maintain a preset level and has the ability to turn off the main pumps when either a high or low preset limit has been exceeded. The basic System consists of a Control, a Barrier, a Fuel Cell Module, a desktop PC and an optional injector pump is offered. Intrinsically safe approvals have been received from the applicable domestic and foreign agencies, such as Underwriters Laboratories (UL) U.S. (UL) Canada and LCIE (Registered Quality) Europe.

Emcee Model 1143 Micro-Filter Analyzer

Emcee Model 1143 Micro-Filter Analyzer

ASTM Standard Test Methods D6426 and D6824

  • Approved for Middle Distillate Fuels (ASTM D6426 and aviation turbine fuels (ASTM D6824)
  • Use of a peristaltic pump and fuel compatible Tygon tubing facilitates ease of maintenance
  • Completely self-contained with a universal power supply
  • Portable, rugged, lightweight construction
  • Cost effective- Fifteen minutes or less per test
  • Utilizes expendable standard porosity filters
  • Pressure sensitive push button array for simplified test selection and operation
  • Digital displays- Pressure, Volume and Filterability Quality Factor (F-QF)
  • Ease of calibration

Emcee Model 1140 Micro-Separometer™

EMCEE Model 1140 Micro-Separometer

WATER SEPARATION CHARACTERISTIC, FREE WATER AND PARTICULATE TESTING

ASTM Standard Test Methods D3948, D7224, D7261 & D4860

The Model 1140 Micro-Separometer is a
electro-mechanical instrument used to perform four discrete tests. ASTM Standard Test Methods D3948 (Jet), D7224 (Jet) and D7261 (Diesel) are used to rate water separation characteristics and D4860 (Jet or Diesel) detects and numerically rates free water and particulate contamination. Note – This instrument
performs each of the four tests above simply by using one of the four “Six Packs” containing the proper coalescer cells.

Emcee Model 1154 Precision Conductivity Meter

Emcee Model 1154 Precision Conductivity Meter

ASTM Standard Test Method D 4308

  • Four standard ranges provide high resolution and accurate direct measurement of electrical conductivity of fluids from.01 to 20,000
    picosiemens per meter (pS/m)
  • Capable of being modified to provide higher conductivity ranges
  • Optional capability to measure sample temperature
  • Mechanical design of the Conductivity (KSLA) Cell allows accurate self measuring of the test sample volume (100 mL)
  • Electronic circuitry automatically samples and holds the reading
  • Large five digit liquid crystal display
  • Internal self check calibration of all electronic circuits
  • Ease of disassembly and cleaning of the Conductivity Cell
  • Completely self contained powered by 6 standard 9 volt batteries monitored by a low battery indicator

Emcee Model 1153 Digital Conductivity Meter

Emcee Model 1153 Digital Conductivity Meter

ASTM Standard Test Method D 2624

  • Continuous standard electrical conductivity range from 0 to 2,000 picosiemens per meter (pS/m)
  • Available in other conductivity ranges (from2000 – 2MPs/m)
  • LED illuminates during automatic test cycle (3 seconds)
  • Temperature measured and displayed in Celsius and Fahrenheit
  • Data stored (non volatile) until next test cycle is performed
  • Hermetically sealed
  • Text presentation of operational status
  • Automatic over range and low battery indications
  • Single pushbutton operation
  • Digital, liquid crystal display
  • Powered by 3 standard lithium cells
  • Approved intrinsically safe design for use in hazardous environments by Underwriters Laboratories (UL) U.S., (UL) Canada and LCIE (Europe)

Emcee Model 1152 Digital Conductivity Meter

EMCEE Model 1152
Digital Conductivity Meter

ASTM Standard Test Method D 2624

  • Continuous standard electrical conductivity range from 0 to 1999 in increments of 1 picosiemen per meter (pS/m)
  • Available in other standard and non-standard conductivity ranges
  • Large digital, liquid crystal display
  • Reliable advanced integrated circuit design technology
  • Self check calibration with field adjustment capability
    Automatic over range and low battery indication
  • Capable of storage tank and tanker truck measurement with the use of a short cable or cable reel kit
  • Powered by 3 readily available alkaline batteries
  • Electronics housed in a rugged cast aluminum case coated with solvent resistant paint equipped
    with a detachable stainless steel probe
  • Approved intrinsically safe design for use in hazardous environments by Underwriters Laboratories (UL), Canadian Standards Association (CSA), and LCIE

For Product and Sales Information Contact Us Today

sales@choiceanalytical.com or 832-271-7448